4

D-Model Screw Plug Immersion Heater Elements
	1" No Taper Screw Plug Element

	Model Number	Wattage		Immersion Length	Tubular Diameter	Foldback
		240 Volt	208 Volt
	Medium Density			2 Year Replacement Guarantee
	Standard line gives a full wattage and voltage range from low through medium watt density elements that are useable in hard and soft water conditions.
	D-220-U-R	2000	1500	10-3/4"	.260	NO
	D-225-U-R	2500	1880	7-1/2"	.260	YES
	D-230-U-R	3000	2250	9"	.260	YES
	D-235-U-R	3500	2625	10"	.260	YES
	D-240-U-R	4000	3000	11-3/4"	.260	YES
	D-245-U-R	4500	3400	11-3/4"	.260	YES
	D-250-U-R	5000	3750	13-1/2"	.260	YES
	D-255-U-R	5500	4125	15-1/2"	.260	YES
	D-260-U-R	6000	4500	15-1/2"	.260	YES
		Wattage	Voltage
	D-745-U-C	4500	277	10-11/16"	.315	YES
	Low Density			5 Year Replacement Guarantee
	All elements in this series will be 75 nominal sheath watt density for longer life under adverse water and operating conditions such as dry fire, mineral build–up and corrosive water.
	DI-115-C	1500+	+120 Volt	6"	.315	YES
	DI-215-C	1500	1125	6"	.315	YES
	DI-225-C	2500	1880	9-1/2"	.315	YES
	DI-235-C	3500	2625	12-1/2"	.315	YES
	DI-245-C	4500	3400	14-3/4"	.315	YES
	DI-250-C	5000	3750	18-3/4"	.315	YES
	DI-260-C	6000	4500	22-1/4"	.315	YES
		Wattage	Voltage
	DI-350-C	5000	208	15"	.315	YES
	DI-225-L-C	2500	240	15-7/8"	.315	YES
	DI-745-C	4500	277	13-7/16"	.315	YES
	DI-560-C	6000	480	16-1/8"	.315	YES
	DI-560-U-C	6000	480	15-1/8"	.315	YES
D-Model Screw Plug Immersion Heater Elements 1" No Taper Screw Plug Element Special Voltage
	High Density			1 Year Replacement Guarantee
	D-350-H-R	5000	208	9-3/4"	.260	YES
	D-360-H-R	6000	208	11-3/4"	.260	YES
	D-530-H-R	3000	480	10-11/16"	.260	NO
	D-540-H-R	4000	480
			480
			480

One G-3 gasket and instruction sheet packaged with each D-Model heating element.
X = Discontinued when current stock is depleted.
Suffix R denotes for residential applications only
Suffix C denotes for commercial applications, may be used on certain residential applications (contact factory for assistance).

4